-
Design Documentation
Those needing greater detail than is available in the Design Documentation here, should check out Jim Tiemann's Build Guide. Note that Jim uses slightly different parts, so don't paint by colour.
Key Features:
- RCA input, 1/4" (6.3 mm) TRS output.
- Socketed dual opamp for easy opamp rolling.
- Meier cross-feed, which can be bypassed with a switch.
- Output muting circuit, which prevents large thumps when the amp is switched on and off.
- 33 mW (300 Ω); 250 mW (32 Ω); 350 mW (20 Ω) at less than 0.1 % THD+N.
- 2.0 µV noise floor (RMS, unweighted); 1.5 µV (RMS, A-weighted).
Build difficulty (1-5): 2 (fairly easy)
-
The chassis is left as an exercise for the reader. David Rowe (@dasroot on diyAudio) was kind enough to create the 3D printed chassis shown below. The print files (*.stl) are provided below. Thanks Dave!
The chassis requires five self-tapping screws, preferably ones intended for use in plastic. The Neutrik A-SCREW-1-8 is a suitable option. They are available at Mouser (P/N: 568-A-SCREW-1-8).
Chassis Option #1
Chassis Option 1 is shown below. The output connector has been fitted with a knurled dress nut (Neutrik P/N: NRJ-NUT-MK; Mouser P/N: 5550-1002).
Chassis Option #2
An example of Chassis Option #2 is shown below. The output connector has been fitted with a Neutrik dress nut (Neutrik P/N: NRJ-NUT-MS; Mouser P/N: 568-NRJ-NUT-MS).
And, of course, the LED is a non-blinding Neurochrome Blue (Lumex P/N: SSL-LX5093SBD/A; Mouser P/N: 696-SSLLX5093SBD/A).